Monitor Naming - Hitachi SH1 Series Basic Manual

Chapter 4
[dA-01] to [dA-41]
4.2 Monitor naming (Nomenclature)
dA - 01
Parameter
Group
4.3 Description of monitor functions
※For more detail, please contact your supplier or local
Hitachi sales office .
Monitors data list
■Monitor mode (d code)
Code/Name
dA-01
Output frequency
monitor
dA-02
Output current monitor
dA-03
Rotation direction
monitor
dA-04
Frequency reference
monitor (After calculation) *2)
dA-06
Output frequency scale
conversion monitor
dA-08
Detect speed monitor
dA-12
Output frequency
monitor (signed)
dA-14
Frequency upper limit
monitor
dA-15
Torque reference
monitor (After calculation) *2)
dA-16
Torque limit monitor
dA-17
Output Torque monitor
*1)
dA-18
Output Voltage monitor
(RMS)
dA-20
Current position
monitor
dA-26
Pulse train position
deviation monitor
dA-28
Pulse count monitor
dA-30
Input power monitor
dA-32
Accumulation input
power monitor
dA-34
Output power monitor
dA-36
Accumulated output
power monitor
dA-38
Motor temperature
monitor
dA-40
DC bus voltage monitor
dA-41
BRD load rating monitor
Value in the
group
Range (unit)
0.00～590.00(Hz)
<Actual frequency output>
0.0～655.35(A)
(0.00 to 6553.5(A)(SH1-1600H or
above))
0(stop)/1(0Hz output)/
2(forward)/3(reverse)
-590.00～590.00(Hz)
<as target value>
0.00～59000.00(Hz)
-590.00～590.00(Hz)
<Encoder feedback required>
-590.00～590.00(Hz)
0.00～590.00(Hz)
-1000.0～1000.0(%)
<Torque control mode required>
0.0 to 500.0(%)
-1000.0 to 1000.0(%)
0.0 to 800.0(V)
When [AA121]≠10 or [AA123]≠03
-536870912 to +536870911 (pls)
Parameter setting other than above
-2147483648 to +2147483647(pls)
-2147483647～+2147483647(pls)
0 to 2147483647(pls)
0.0～655.35(kW)
(0.00 to 6553.5(kW)(SH1-1600H or
above))
0.00～100000.00(kWh)
0.0～655.35(kW)
(0.00 to 6553.5(kW)(SH1-1600H or
above))
0.00 to 1000000.00 (kWh)
-20.0 to 200.0 (degree Celsius)
0.0 to 1000.0(VDC)
0.00 to 100.00(%)
For parameter configuration
Code/Name
dA-42
Electronic thermal load
rating monitor (MTR)
dA-43
Electronic thermal load
rating monitor (CTL)
dA-45
Safety STO monitor *3)
dA-46
Safety Option Hardware
Monitor *3)
dA-47
Safety Option Function
Monitor *3)
dA-50
Control terminal status
dA-51
Input terminal monitor
dA-54
Output terminal monitor
dA-60
Analog input/output status monitor
*4)
dA-61
Analog input [Ai1] monitor
dA-62
Analog input [Ai2] monitor
dA-63
Analog input [Ai3] monitor
dA-64
Analog input [Ai4] monitor
dA-65
Analog input [Ai5] monitor
dA-66
Analog input [Ai6] monitor
dA-70
Pulse train input monitor
(internal)
dA-71
Pulse train input monitor
(option)
dA-81
Option slot-1 status
dA-82
Option slot-2 status
dA-83
Option slot-3 status
*1) dA-17 is invalid when the Control mode selection (AA121/AA221)
setting is 00 to 07 (V/f control mode).
*2) (After calculation) means that it is after calculation such as auxiliary
speed or addition frequency and calculation such as torque bias.
*3) For SH1 series, function safety is invalid.
*4) dA-60 is available also for the terminals of the option terminal
board.
*5)This option is not suitable for SH1 series.
4-6
[dA-42] to [dA-83]
Range (unit)
0.00 to 100.00(%)
00(no input)/01(P-1A)/
02(P-2A)/03(P-1b)/04(P-2b)/
05(P-1C)/06(P-2C)/07(STO)
0000 to FFFF
00(no input )/ 01(STO)/
02(SBC)/03(SS1)/04(SLS)/
05(SDI)/06(SSM)
00(P1-TM)/02(P1-TM2)/
15(not connect)
A B 9 8 7 6 5 4 3 2 1
Input B,A,9,8,7,6,5,4,3,2＆1：OFF
AL(-) 15 14 13 12 11
Output (-),14：ON
Output AL,15,13,12,
11：OFF
Ao4 Ao3 Ai4 Ai3 Ao2 Ao1 Ai2 Ai1
Teminal Ao4,Ao3, Ai4, Ai3,
Ao1,Ai2,Ai1：Voltage
Teminal Ao2：Current
0.00 to 100.00(%)
-100.00 to 100.00(%)
0.00 to 100.00(%)
0.00 to 100.00(%)
-100.00 to 100.00(%)
-100.00 to 100.00(%)
-100.00 to 100.00(%)
00:(none)/01:(P1-EN)/
02:(P1-ECT)/03:(P1-PN)/
05:(P1-DN)/06:(P1-PB) /
07:(P1-CCL)/18:(P1-AG)
33:(P1-FB)(only dA-82)
48:(P1-FS)(only dA-83) *5）