Removing And Installing The Heating Backup Pump V488 - Skoda Octavia III 2013 Workshop Manual

Octavia III 2013 ➤ , Octavia III 2014 ➤
1.6/66; 77; 81; 2.0/105; 110; 135 kW TDI CR engine - Edition 07.2014
– Disconnect plug connection -3-.
Note
Place a cloth below to absorb leaking coolant.
– Disconnect coolant hoses with hose clamps -MP7-602
(3094)- .
– Loosen hose clamps -1-, remove coolant hoses.
– Unscrew screw -2- and remove charge air cooler pump -
V188- .
Install
Install in the reverse order of removal. When doing this, note the
following:
Note
Secure all hose connections with spring-type clips that comply
with the series design ⇒ ETKA - Electronic Catalogue of Original
Parts .
– Check coolant level
Tightening torques
♦ ⇒ "2.3 Summary of components - electric coolant pump", page
162
♦ Summary of components - sound damping system ⇒ Body
Work; Rep. gr. 50
2.10 Removing and installing the heating
backup pump - V488-
Special tools and workshop equipment required
♦ Hose clamps up to ∅ 25 mm - MP7-602 (3094)-
♦ Hose binding claw - VAS 6362-
Removing
– Remove the sound dampening system ⇒ Body Work; Rep.
gr. 50 .
168
Rep. gr.19 - Cooling
⇒ page 156 .