Skoda Octavia III 2013 Workshop Manual page 294

Octavia III 2013 ➤ , Octavia III 2014 ➤
1.6/66; 77; 81; 2.0/105; 110; 135 kW TDI CR engine - Edition 07.2014
– Disconnect electrical plug connections -2- on the closing
flange, thereby unlocking the plug lock.
Sender for fuel gauge display - G- installed
Note
To achieve a precise indication of the resistance with a "full fuel
tank " the fuel tank must be filled completely with the sender in‐
stalled. After filling of the full fuel tank, drive at least 500 m so that
any air bubbles can escape from the fuel tank. Then top up.
– Connect multimeter to resistance measurement between con‐
tacts -B1- and -B2-.
• Fuel tank empty: approx. 270 Ω.
• Fuel tank full: approx. 70 Ω.
– Connect multimeter to resistance measurement between con‐
tact -B1- and -B3-.
• Fuel tank empty: approx. 70 Ω.
• Fuel tank full: approx. 270 Ω.
– Connect multimeter to resistance measurement between con‐
tact -B2- and -B3-.
• Any sender position: approx. 340 Ω.
286
Rep. gr.20 - Fuel supply system