– Insert circlip pliers into both lock ring openings -arrow-.
– Turn locking ring anticlockwise by approximately 25°.
– Tilt lock ring out of the fuel filler neck and remove through the
opening -arrows- for the cap.
– Pull misfuelling protection out of the fuel filler neck -arrow-, use
circlip pliers if necessary.
Install
Installation is carried out in the reverse order. Pay attention to the
following:
1.6/66; 77; 81; 2.0/105; 110; 135 kW TDI CR engine - Edition 07.2014
Octavia III 2013 ➤ , Octavia III 2014 ➤
2. Removing and installing parts of the fuel supply system
243