Diagnostics Connection - Mercedes-Benz EQS 2021 Operator's Manual

Hide thumbs Also See for EQS 2021:
Table of Contents

Advertisement

90
General notes
[Signature]
Director of division ZZ
TIREFIT kit
Copy and translation of the original declaration of
conformity:
EC declaration of conformity
In accordance with EC Directive 2006/42/EC
We hereby declare that the product
Product designation: Daimler electric air pump
Model designation: 0867, DT/UW 200056
MB part no.: A 000 583 5101
complies with the following relevant regulations:
2004/108/EC
Applied harmonised standards, in particular:
DIN EN 55014-1: 2012
DIN EN 55014-2: 2016
Manufacturer: Dunlop Tech GmbH
Address: Offenbacher Landstr. 8, 63456 Hanau
Authorised representative: IMS dept.
Date: October 2019
Signature: IMS-AE, IMS-AE-L

Diagnostics connection

The diagnostics connection is a technical inter-
face in the vehicle. It is used, for example, in the
context of repair and maintenance work or for
reading out vehicle data at a specialist workshop.
Diagnostic devices should therefore only be con-
nected at a qualified specialist workshop.
& WARNING Risk of accident due to con-
necting devices to the diagnostics con-
nection
If you connect devices to the diagnostics con-
nection of the vehicle, the function of vehicle
systems and operating safety may be
impaired.
For safety reasons, we recommend that
#
you only use and connect products
approved by your Mercedes-Benz service
centre.
ohne
& WARNING Risk of accident due to objects
in the driver's footwell
Objects in the driver's footwell may impede
pedal travel or block a depressed pedal.
This jeopardises the operating and road safety
of the vehicle.
Stow all objects in the vehicle securely
#
so that they cannot get into the driver's
footwell.
Always fit the floor mats securely and as
#
prescribed in order to ensure that there
is always sufficient room for the pedals.
Do not use loose floor mats and do not
#
place floor mats on top of one another.
* NOTE Battery discharging from using devi-
ces connected to the diagnostics connec-
tion
Using devices at the diagnostics connection
drains the battery.
Check the charge level of the battery.
#

Advertisement

Table of Contents
loading

Table of Contents