Mercedes-Benz EQS 2021 Operator's Manual page 299

Combo 2 vehicle socket
Press charging interruption button 2.
#
The charging process is ended. Status display
1
lights up white. The vehicle socket is
unlocked.
Remove charging cable connector
#
the vehicle socket within 30 seconds.
After the 30 seconds have elapsed, the vehicle
socket will be locked again and the charging
process will resume.
%
If you cannot remove the charging cable con-
nector, repeat the unlocking procedure. If the
charging cable connector is still locked, con-
tact a qualified specialist workshop.
% 1
Status display indicator lamp remains lit
for some time after the charging cable con-
nector has been removed and then goes out.
Close the socket flap.
#
For vehicles with an electric socket flap,
observe the following notes on closing the
socket flap.
Remove the charging cable connector from
#
the mains socket, or from the socket on the
wallbox/charging station, and stow the vehi-
cle's charging cable safely in the vehicle
( page 284).
/
ohne
3 from The electric socket flap closes automatically in
the following situations:
shortly after the charging cable connector has
R
been removed
after the socket flap has been tapped in the
R
direction to close it
after transmission position i, h or k has
R
been engaged
Automatic reversing function of the electric
socket flap
If an obstacle impedes the electric socket flap
during the closing process, the socket flap opens
again automatically and the driver's display shows
a corresponding display message. The automatic
reversing function is only an aid and is not a sub-
stitute for your attentiveness.
When closing the socket flap, make sure that
#
no body parts or objects are in the closing
area.
Driving and parking 297