Mercedes-Benz EQS 2021 Operator's Manual page 483

▌Activating/deactivating Bluetooth
Multimedia system:
© Settings System
4 5 5
Internet and Bluetooth
5
Switch Bluetooth on or off.
#
Near Field Communication (NFC)
▌Information on Near Field Communication
(NFC)
NFC enables short-range wireless data transfer or
connection of a mobile phone with the multimedia
system.
Further information can be found at: https://
www.mercedes-benz-mobile.com/
▌Switching near-field communication on or off
Multimedia system:
© Settings System
4 5 5
Internet and Bluetooth
5
Activate or deactivate NFC.
#
%
Further information on connecting a mobile
phone via the NFC interface (
Wi-Fi
®
▌Wi-Fi connection overview
You can use Wi-Fi to set up a connection to the
Internet or to external network devices.
%
The availability of the function is dependent
on the country.
Generally, two types of Wi-Fi connection are avail-
able:
To use the multimedia system as a Wi-Fi hot-
R
spot (
/
The vehicle's multimedia system serves as Wi-
Fi hotspot for mobile communication devices,
such as smartphone or tablet PC, for example.
Using a mobile communication device as a Wi-
R
Fi hotspot (tethering) (
An external Wi-Fi hotspot is accessed for the
Internet connection of the vehicle's multime-
dia system.
page 545).
/
page 481)
page 579)
/
ohne
MBUX multimedia system 481
▌Switching Wi-Fi on or off
Multimedia system:
© Settings System
4 5 5
Internet and Bluetooth
5
Select Wi-Fi.
#
The controller is to the right: Wi-Fi is switched
on.
When Wi-Fi is switched on, you can connect the
multimedia system with external hotspots or make
it available as a hotspot for external devices.
When Wi-Fi is switched off, it is not possible to
establish a hotspot connection.
When Wi-Fi is switched off, no connection can be
established with the MBUX rear tablet.
%
The availability of the function is dependent
on the country.
▌Using the multimedia system as a Wi-Fi hotspot
Requirements:
The device to be connected supports at least
R
one of the types of connection described.
The connection types shown depend on the
device to be connected. The function must be