Mercedes-Benz EQS 2021 Operator's Manual page 181

Change the position of the additional cushion:
#
move additional cushion 1
To remove additional cushion: open Velcro
#
strip 4 of additional cushion 1.
Remove additional cushion 1.
#
Attaching a heated additional cushion
Attach the additional cushion to the head
#
restraint as described.
Move the head restraint to the very top.
#
Push press-studs 2 on the additional strap
#
into counterpieces 1 on the head restraint.
Move the head restraint to the desired height.
#
Switching neck heating from the additional cush-
up or down. ion on/off
Make sure that press-studs
#
tional strap are correctly pushed into counter-
pieces
Ensure that the "Couple neck heating to seat
#
heating" function is active (
the multimedia system.
Activate or deactivate the seat heating
#
( page 182).
/
▌Folding the centre head restraint into position
and folding it back manually (premium seats)
& WARNING Risk of injury due to incorrectly
adjusted head restraints
If head restraints have not been adjusted cor-
rectly, there is an increased risk of injury in
the head and neck area, e.g. in the event of an
accident or sudden braking.
Before driving off, make sure for every
#
vehicle occupant that the centre of the
head restraint supports the back of the
head at about eye level.
2 on the addi-
1
on the head restraint.
page 180) in
/
ohne
Seats and stowing 179
To fold into position: pull the head restraint
#
upwards until it engages.