Mercedes-Benz EQS 2021 Operator's Manual page 452

450 MBUX multimedia system
be used simultaneously. A user profile can only be
activated simultaneously on one display.
%
Some settings apply to the entire vehicle and
are displayed in all user profiles, e.g. ambient
lighting and the current navigation settings.
These initially belong to the driver, but can
also be changed by the other vehicle occu-
pants in their user profile.
You can individualise a user profile in the vehicle
using the set-up assistant or using the settings in
your user profile. Some settings, e.g. the
Mercedes me PIN and a profile photo are made in
the Mercedes me App or in the Mercedes me Por-
tal.
%
If the user profile is downloaded while travel-
ling, user profiles are not set up using the set-
up assistant.
User-specific content and applications with per-
sonal data are protected by different levels of
security ( page 451).
/
To access protected content, the Mercedes me
PIN and, depending on the vehicle equipment,
biometric sensors are used.
%
The security level is set by the multimedia sys-
tem and calculated from the combination of
all sensor inputs. Some security levels cannot
be turned off.
If the vehicle key is linked to the user profile, the
user profile is pre-activated when unlocking the
vehicle or approaching a vehicle with KEYLESS-
GO. Light, mirror and seat adjustments are made
during this process. To use a user profile or an
application, the vehicle key also serves as a sen-
sor input for authorisation.
%
When a user profile is activated, the following
personalised comfort systems, for example,
can be adjusted or their settings loaded:
Seat
R
Ambient light
R
Outside mirrors
R
Blinds
R
Climate control settings
R
If the user profile is activated when driving
then the driver's seat position will not be
adjusted.
ohne
User-specific content
Depending on the vehicle equipment you can, as
a user, save the following settings, for example:
Driver's seat, steering wheel and mirror set-
R
tings
Climate control
R
Ambient light
R
Radio (including station list)
R
Suggestions and favourites
R
You can watch an animation on this topic via the
following link:
▌Adding a user
Requirements:
To use the set-up assistant: the vehicle is sta-
R
tionary.
Multimedia system:
© f Change user
4 5 5
Add user.
Select f
#
A QR code is loaded.