Mercedes-Benz EQS 2021 Operator's Manual page 608

606 MBUX multimedia system
▌Switching loudness normalisation in the
®
Burmester surround sound system on or off
Multimedia system:
© Media Z
4 5 5
Loudness normalisation
5
The function compensates for differing loudness
when changing between audio sources and within
an audio source. Several levels are available for
this purpose. The currently set level is displayed.
The loudness normalisation can also be switched
off.
Switch on one level.
#
or
Switch off the loudness normalisation.
#
▌Adjusting the balance and fader in the
®
Burmester
Multimedia system:
Equaliser ©
5 4
Balance and Fader
5
Adjusting the balance
Move the volume distribution between the
#
right and left sides of the vehicle in the grid
shown.
The volume is distributed between the speak-
ers on the left and right sides in the vehicle.
Adjusting the fader
Move the volume distribution between the
#
front and rear of the vehicle in the grid shown.
The volume is distributed between the speak-
ers in the front and rear of the vehicle.
%
Setting 0
music and voice reproduction.
surround sound system
Media Z
5 5
is recommended for high quality
ohne
▌Selecting a sound profile in the Burmester
surround sound system
Multimedia system:
© Media Z
4 5 5
Setting an existing sound profile
Select a sound profile.
#
Setting up a personal sound profile
Select Personal sound profile
#
Z . Select Reconfigure
and restart the set-
up assistant.
Setting up a personal sound profile for the first
time:
Select Personal sound profile.
#
Open the set-up assistant with Start.
#
Observe the messages on the display and
#
select the preferred settings.
The personal sound profile is created with the
selected settings and can be selected in the
Sound profiles menu.
®
and select