Mercedes-Benz EQS 2021 Operator's Manual page 670

668 Wheels and tyres
2
Position support of jack
#
port point 1.
Turn ratchet 3 clockwise until support
#
sits completely on jack support point
the base of the jack lies evenly on the ground.
Turn ratchet 3 until the tyre is raised a maxi-
#
mum of 3 cm from the ground.
Loosen and remove the wheel (
#
Removing a wheel
Requirements:
The vehicle is raised.
R
Note on AMG vehicles:
* NOTE Damage to the ceramic brake disc
when changing a wheel
Mercedes-AMG vehicles with ceramic brake
discs: during removal and repositioning of the
wheel, the wheel rim can strike the ceramic-
brake disc and damage it.
Take particular care.
#
Ask another person for assistance or use
#
a second centring pin.
4
on jack sup-
When changing a wheel, avoid applying any force
to the brake discs, as this could impair the level of
2
comfort when braking.
1 and
* NOTE Damage to the wheels' plastic ele-
ments when changing a wheel
Plastic elements on wheels may be damaged
page 668).
/
when removing and repositioning the wheel.
#
* NOTE Damage to threading from dirt on
#
#
ohne
Do not raise the wheels by the plastic
elements when removing and reposition-
ing.
wheel bolts
Do not place wheel bolts in sand or on a
dirty surface.
Unscrew the uppermost wheel bolt com-
pletely.