Mercedes-Benz EQS 2021 Operator's Manual page 655

Lowering the vehicle after unloading
Switch on the power supply.
#
Switch on the vehicle.
#
Swipe upward in the transport settings to
#
select Standard level and press a.
The vehicle is adjusted to the height of the last
active level and the Lowering vehicle
is displayed.
After the vehicle has been lowered, press the
#
G button for at least two seconds.
The transport settings are closed.
Towing eye storage location
Towing eye 1 is located under the boot floor.
Fitting and removing the towing eye
message
ohne
Breakdown assistance 653
Press cover 1 at top 2 inwards and
#
remove.
Screw in the towing eye clockwise as far as it
#
will go and tighten.
Vehicles with a trailer hitch: vehicles with a trailer
hitch do not have a rear bracket for the towing
eye. Fasten the tow bar to the trailer hitch.
Make sure that cover 1 engages in the
#
bumper when you remove the towing eye.