Mercedes-Benz EQS 2021 Operator's Manual page 654

652 Breakdown assistance
Before loading the vehicle, wait until transport
#
level has been reached and the
level status is shown.
% If the vehicle is raised to transport level, the
transport settings will continue to be shown
even after a restart. Operation of the driver's
display is meanwhile restricted.
When the vehicle is at transport level, it is lowered
again in the following situations:
When driven faster than 40 km/h.
R
The 12 V battery is discharged.
R
The vehicle is adjusted to the height of the last
Transport active level.
Transporting the vehicle
Load the vehicle onto the transporter.
#
Shift the transmission to position j.
#
Use the electric parking brake to secure the
#
vehicle against rolling away.
Switch off the vehicle and the power supply.
#
Only secure the vehicle by the wheels.
#
4MATIC vehicles
#
* NOTE Damage to the drive train due to
#
Unloading the vehicle
#
ohne
Make sure that the front and rear axles come
to rest on the same transportation vehicle.
incorrect positioning of the vehicle
Do not position the vehicle above the
connection point of the transport vehi-
cle.
Make sure that the vehicle is raised to trans-
port level before unloading (
/
page 366).