Mercedes-Benz EQS 2021 Operator's Manual page 548

546 MBUX multimedia system
Connecting a mobile phone
Hold the NFC interface of the mobile phone
#
(see the manufacturer's operating instruc-
tions) against NFC interface
stowage compartment.
Follow the additional prompts on the central
#
display to connect the mobile phone. Connect
the mobile phone in single telephone mode
( page 543). Connect the mobile phone in
/
two phone mode (
Replacing a mobile phone
Hold the NFC interface of the mobile phone
#
(see the manufacturer's operating instruc-
tions) against NFC interface
stowage compartment.
Follow the additional prompts on the central
#
display to replace the mobile phone in one or
two phone mode (
If required, confirm the prompts on your
#
mobile phone (see the manufacturer's operat-
ing instructions).
%
If your mobile phone supports wireless charg-
ing, it can be charged on the mat
( page 217).
/
%
If the mobile phone is not charging, switch off
NFC on the mobile phone (see the manufac-
1 in the front
turer's operating instructions).
Further information can be found at: https://
www.mercedes-benz-mobile.com/
page 544).
/
1 in the front
page 544).
/
ohne
▌Setting the reception and transmission volume
Requirements:
A mobile phone is connected (
R
Multimedia system:
© Phone Z
4 5 5
My devices
5
This function ensures optimal language quality.
%
Please note that the respective mobile phone
must be selected for adjustment of the recep-
tion and transmission volume.
Select Ä in the line of the mobile phone.
#
Select Volume.
#
Set the reception and transmission volume
#
using Reception volume and
volume.
Further information on the recommended recep-
tion and transmission volume: https://
www.mercedes-benz-mobile.com/
page 543).
/
Devices
5
Transmission