Mercedes-Benz EQS 2021 Operator's Manual page 340

338 Driving and parking
Assist DISTRONIC) or does not exceed it (vari-
able limiter).
If the stored speed has been deleted, the cur-
rent vehicle speed is stored.
% When you switch off the vehicle, the stored
speed is deleted. When you activate Active
Distance Assist DISTRONIC, the last speed
stored for the variable limiter is deleted.
Increasing or reducing the speed
To increase the stored speed: swipe upwards
#
from the bottom of control panel 1.
The stored speed is increased by 1 km/h.
R
To decrease the stored speed: swipe down-
#
wards from the top of control panel 1.
The stored speed is decreased by 1 km/h.
R
or
Briefly press M on the upper section or
#
N on the lower section of control panel
1.
The stored speed is increased or reduced by
10 km/h.
or
Press and hold M on the upper section or
#
N on the lower section of control panel
1.
The stored speed is increased or reduced in
increments of 10 km/h.
or
Accelerate the vehicle to the desired speed.
#
Press M on the upper section of control
#
panel 1.
Adopting the limit speed shown in the driver's dis-
play
Activate Active Distance Assist DISTRONIC or
#
the variable limiter.
Press J.
#
The limit speed displayed in the driver's dis-
play is adopted as the stored speed. The vehi-
cle adapts its speed to that of the vehicle in
front, but only up to the stored speed, or limits
its speed accordingly.
ohne
Pulling away with Active Distance Assist
DISTRONIC
Activate Active Distance Assist DISTRONIC
#
and remove your foot from the brake pedal.
Press J.
#
or
Depress the accelerator pedal briefly and
#
firmly.
The functions of Active Distance Assist
DISTRONIC continue to be carried out.
Reducing or increasing the specified distance
from the vehicle in front
Press K.
#
The h display appears. The specified dis-
tance is reduced by one level.
If the lowest level is already selected, the
selection jumps to the highest level.