Installing the throttle link
1. Install:
• Throttle link rod
▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼
a. Install the roller "1", a new cotter pin "2",
the spring "3", the collar "4", and the bolt
"5".
5
1
2
b. Install the throttle lever assembly "1" to the
crankcase. Fit the end "a" of the spring "2"
into the hole "b" in the crankcase.
a
2
c. Install the wave washer "1", collar "2", and
bolt "3".
2
3
3
b
1
1
d. Install the throttle cam assembly "1".
1
4
e. Install the throttle link rod.
f.
Adjust the throttle link rod. See "Adjusting
the throttle link rod" (6-15).
▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲
Adjusting the throttle link rod
1. Adjust:
• Throttle link rod
▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼
a. Loosen the link rod locknut "1", and then
remove the throttle link rod "2" from the
throttle cam "3".
3
6-15
Throttle link rod
1
2