P0-8 Gm Engine Maintenance - Under 1000 Hours - Terex Genie GS-2646 AV Maintenance Manual

Maintenance Manual
Programmed Maintenance Procedures
P0-8 P0-8 G M Engin e M ainte nanc e – U nde r 1 000 H ours
GM Engine Maintenance – Under 1000 Hours
Additional engine maintenance is required. Refer to the Programmed Maintenance Inspection Report for
the specific intervals that apply.
Required maintenance procedures and additional engine information are available in the manufacturer's
manuals. Refer to Specifications, Engine Operator and Maintenance Manuals.
GM .998L Engine
Procedure
Coolant level - check
Oil level - check
Oil, fuel and coolant systems - check for leaks
Fan belt tension and damage - check
Radiator hoses and clamps - check
Intake manifold - check for vacuum leaks
LPG system - check for leaks
Radiator – clean
Engine oil and filter – replace
LPG Vaporizer - drain/clean
PCV valve - check
Air cleaner element - clean/replace
Timing belt - check
Electrical wiring - check for chafing or damage
Vacuum lines and fittings - check
Fuel filter - replace
Fuel lines and clamps - check for leaks
Air intake system - inspect for leaks
Cylinder head bolts - torque (40.5 ft-lbs / 55 Nm)
Valve clearance - check/adjust
PCV valve - replace
Cooling system coolant - replace
Spark plugs - replace
Spark plug wires - check/replace
68
Daily
∅ = Not required
∅
∅
∅
∅
∅
∅
∅
∅
∅
∅
∅
∅
∅
∅
∅
∅
∅
∅
∅
∅
∅
Scissor Lifts
Hour Intervals
100 150 200
∅ ∅ ∅
∅ ∅ ∅
∅ ∅ ∅
∅ ∅
∅ ∅
∅ ∅
∅ ∅
∅ ∅
∅ ∅
∅ ∅
∅ ∅
∅ ∅
∅ ∅
∅ ∅ ∅
∅ ∅ ∅
∅ ∅ ∅
∅ ∅ ∅
∅ ∅ ∅
∅ ∅ ∅
∅ ∅ ∅
∅ ∅ ∅
∅ ∅ ∅
∅ ∅ ∅
∅ ∅ ∅
Part No. 1272215GT
June 2022
400 800
∅ ∅
∅ ∅
∅ ∅
∅ ∅
∅ ∅
∅ ∅
∅ ∅
∅ ∅
∅ ∅
∅ ∅
∅ ∅
∅ ∅
∅ ∅
∅
∅
∅
∅
∅
∅
∅
∅
∅
∅
∅