Maintenance Manual
Programmed Maintenance Procedures
P0-2
P0-2 G reas e th e Stee r Yokes - GS -30, GS-3 2, GS- 46, GS -47
Grease the Steer Yokes - GS-30,
GS-32, GS-46, GS-47
Genie specifications require that this procedure be
performed every 100 hours of operation.
Regular application of lubrication to the steer
yokes is essential to good machine performance
and service life. Continued use of an insufficiently
greased steer yoke will result in component
damage.
1
Locate the grease fitting on the top of the
steer yoke.
2
Pump multipurpose grease into the steer yoke
until the steer yoke is full and grease is being
forced past the bearings. Repeat this step for
the other steer yoke.
Grease Specifications
Chevron Ultra-duty grease, EP NLGI 2 (lithium based)
or equivalent
62
Scissor Lifts
June 2022
Part No. 1272215GT