Table of Contents
Advertisement
Schedule d M ainte nanc e Ins pecti on Re port - Scisso r Lif ts
Model
Serial number
Inspected by (print)
Inspection Type
Q = quarterly or frequent inspections
A = annual inspections
If any inspection receives an "N," tag and remove the machine from service, repair and re-inspect it. After repair, place a "R" in the box.
Drive Chassis
Inspect the Electrical Contactors - GS-30, GS-32,
GS-46, GS-47, GS-69 DC, GS-69 BE
Inspect the Fuel Tank Check Valve Venting
System - GS-69 RT Gas Models
Inspect the Tires, Wheels and Lug Nut Torque
Confirm the Proper Brake Configuration - GS-69,
GS-84, GS-90
Check the Drive Hub Oil Level and Fastener
Torque
Test the Oscillate Axle - GS-90
Check the Steer Yoke King Pin Fastener Torque -
GS-84, GS-90
Chassis Mechanicals and Hydraulics
Check the Module Tray Latch Components
Visual Inspection of the Hydraulic Oil
Inspect the Hydraulic Filters
Test the Function Pump -
GS-69 BE, GS-69 DC
Electrical
Battery Inspection
Inspect the Battery Balancer - GS-69 DC
Inspect the Electrical Wiring
Inspect the Voltage Inverter (if equipped)
Engine
Check the Exhaust System
Check and Adjust the Engine RPM
Part No. 1272215GT
Scheduled
Maintenance Inspection Report – Scissor Lifts
Hour meter
Inspector company
Inspector signature
Legend
Y = yes, acceptable
N = no, remove from service
R = repaired
∅ = not applicable
Intervals
Q
Q-6
Q-12
Q-15
Q-16
A-1
∅
A-3
∅
A-6
∅
Intervals
Q
Q-3
Q-9
Q-10
A-2
∅
Intervals
Q
Q-2
Q-4
Q-5
Q-7
Intervals
Q
Q-11
Q-14
Scissor Lifts Maintenance Manual
Make copies of this report to use for each inspection.
Select the appropriate procedures for the type of
inspection(s) to perform.
A
Platform
Test the Platform Overload Pressure Transducer
and Platform Height Sensor - GS-30, GS-32, GS-
46, GS-47 (if equipped)
Functions and Controls
Check for Open Bulletins and Owner Registration
Test the Flashing Beacons (if equipped)
Test the Fuel Select Operation - Gasoline/LPG
Models
Test the Drive Brakes
Test the Drive Speed – Stowed Position
Test the Drive Speed - Raised Position
A
Test the Down Limit Switch, Level Sensor and
Pothole Limit Switches - GS-30, GS-32, GS-46,
GS-47
Test the Platform Gate Proximity Switches and the
Extension Deck Limit Switch - GS-2646 AV, GS-
2646 AV35
Test the Down Limit Switch Descent Delay - GS-
69, GS-84, GS-90 (if equipped)
A
A
June 2022
Date
Machine owner
Intervals
A-5
Intervals
Q-1
Q-8
Q-13
Q-17
Q-18
Q-19
Q-20
Q-21
A-4
Q
A
∅
Q
A
∅
23
Advertisement
Table of Contents
