P0-6 Kubota Engine Maintenance - Under 1000 Hours - Terex Genie GS-2646 AV Maintenance Manual

Table of Contents

Advertisement

Maintenance Manual
Programmed Maintenance Procedures
P0-6
P0-6 Kub ota En gine Main ten ance – Un der 100 0 Hou rs
Kubota Engine Maintenance – Under 1000 Hours
Additional engine maintenance is required. Refer to the Programmed Maintenance Inspection Report for
the specific intervals that apply.
Required maintenance procedures and additional engine information are available in the manufacturer's
manuals. Refer to Specifications, Engine Operator and Maintenance Manuals.
This maintenance schedule applies to the following Kubota Engines:
Kubota D-1105-E3B
Kubota Engines
Procedure
Coolant level - check
Oil level - check
Oil, fuel and coolant systems - check for leaks
Fuel system filter/water separator – inspect/drain
Fuel hoses and clamp bands - check
Fan belt tension and damage - check
Battery electrolyte level - check
Spark plug - check
Air cleaner element - clean
(Replace the element after 6 times cleaning)
Fuel filter (element type) - clean
Oil filter cartridge - replace,
Engine oil - replace
Radiator hoses and clamps - check
Intake air line - check, D-1105
Fuel filter cartridge - replace
Air cleaner element - replace
Fan belt - replace
Cleaning of water jacket (radiator interior)
Removal of sediment in fuel tank
Damage in electric wiring and loose connections - check
Valve clearance - check
66
Kubota WG972
∅ = Not required
Daily 50
75
Scissor Lifts
June 2022
Hour Intervals
100 150 200 400 500
Part No. 1272215GT
800

Advertisement

Table of Contents
loading

Table of Contents