Installing And Updating Software, Drivers, And Firmware - Lexmark C2335 User Manual

Set up, install, and configure
•
Load envelopes with the flap side up and against the right side of the paper guide.
Warning—Potential Damage: Do not use envelopes with stamps, clasps, snaps, windows, coated
linings, or self‑stick adhesives.
5
From the Paper menu in the control panel, set the paper size and type to match the paper loaded in the
multipurpose feeder.
Linking trays
1
From the home screen, touch Settings > Paper > Tray Configuration > select a paper source.
2
Set the same paper size and paper type for the trays that you are linking.
3
From the home screen, touch Settings > Device > Maintenance > Configuration Menu > Tray Configuration
> Tray Linking.
4
Touch Automatic.
To unlink trays, make sure that no trays have the same paper size and paper type settings.
Warning—Potential Damage: The temperature of the fuser varies according to the specified paper type. To
avoid printing issues, match the paper type setting in the printer with the paper loaded in the tray.
Installing and updating software, drivers, and firmware
Installing the printer software
Notes:
•
The print driver is included in the software installer package.
•
For Macintosh computers with macOS version 10.7 or later, you do not need to install the driver to print
on an AirPrint-certified printer. If you want custom printing features, then download the print driver.
1
Obtain a copy of the software installer package.
•
From the software CD that came with your printer.
•
Go to www.lexmark.com/downloads.
33