Chapter 2: Understanding Printer Messages - Lexmark C770 User Manual
Lexmark c770: user guide
Hide thumbs
Also See for C770:
- User manual (112 pages) ,
- Connection manual (26 pages) ,
- Technical reference (435 pages)
Table of Contents
Advertisement
2
Understanding printer messages
The printer operator panel displays messages describing the current state of the printer and indicates possible printer
problems you must resolve. This topic provides a list of all printer messages, explains what they mean, and tells you how to
clear the messages.
The following table lists the messages in alphanumerical order. You can also locate a message using the index.
Message
Activating Demo Mode
Activating Menu Changes
Activating PPDS Mode
Bin <x> Full
Busy
Calibrating
Cancel not available
Cancelling
<color> Cartridge Low
Change <src> <Custom Type Name>
Change <src> <Custom String>
Change <src> <size>
Change <src> <type> <size>
Check <device> Connection
Clearing job accounting statistics
Close door
Close <tray> door
Copies
Deactivating Demo Mode
Action
The printer is entering Demo Mode.
Wait for the message to clear.
The PPDS emulator has been activated.
• The specified bin is full.
• Remove the stack of paper from the bin to clear the message. If you
assigned the bin a name, the bin name is displayed instead of the bin
number.
Wait for the message to clear, or cancel the print job.
Wait for the message to clear.
Wait for the message to clear.
Wait for the message to clear.
Specified toner cartridge is low. <Color> refers to either Cyan,
Magenta, Yellow, or Black.
• Press
if you have changed the media.
• Select Use current to print on media currently in the printer.
• Cancel the current job.
The specified device is either not fully connected to the printer or is
experiencing a hardware failure.
• Reestablish communication by removing the specified device and
reattaching it to the printer.
• Press
to clear the message and continue printing.
• In the case of a hardware failure, turn the printer off and back on. If
the error recurs, turn the printer off, remove the specified device, and
call for service.
Wait for the message to clear.
Close the upper and lower doors to clear the message.
Close the 2000-sheet drawer door to clear the message.
Enter the desired number of copies.
The printer is leaving Demo Mode.
49
Advertisement
Table of Contents
