Pdf Menu; Postscript Menu - Lexmark C770 User Manual

Menu selection Purpose
Hex Trace Helps isolate the source of
a print job problem.
Coverage Provides an estimate of
Estimator the percent coverage of
cyan, magenta, yellow, and
black on a page. The
estimate is printed on a
separator page.
LCD Contrast Adjusts the contrast of the
operator panel display.
LCD Brightness Adjusts the brightness of
the operator panel display.

PDF Menu

Use this menu selection to change printer settings that affect PDF jobs.
Menu selection Purpose
Scale to Fit Scales page content to fit the
selected media size.
Annotations Specifies whether to print
annotations in the PDF.

PostScript Menu

Use this menu selection to change printer settings that affect jobs using the PostScript printer language.
Menu selection Purpose
Print PS Error Prints a page defining the
PostScript emulation error when
an error occurs.
Using printer menus
Values
Activate
Off*
On
1–10
1–10
Values
Yes
No*
Do Not Print*
Print
Values
Off*
On
31
With Hex Trace selected, all data sent to
the printer is printed in hexadecimal and
character representation. Control codes
are not executed.
Note: To exit Hex Trace, turn the printer off,
or reset the printer by pressing the Stop
button.
Percent coverage is not printed.
Prints the estimated percentage of
coverage for each color on a page.
5* is the default setting.
A higher value will make the display appear
lighter, a lower value makes the display
appear darker.
5* is the default setting.
A higher value increases the brightness of
the display, a lower value decreases the
brightness of the display.
Yes—Scales the page to fit the
selected print media.
No*—Does not scale the page;
printed text or graphics will be
cropped if they are larger than the
selected print media.
Do Not Print*—Does not print PDF
annotations.
Print—Prints PDF annotations.
Discards the print job without printing an
error message.
Prints an error message before it
discards the job.