Paper Texture - Lexmark C770 User Manual

size paper is installed in the printer). When a request is received to print on A4 paper, the printer will substitute letter for A4
and print the job instead of displaying a change paper request.
Menu selection Purpose
Substitute Size Substitutes the specified paper
size if the requested size is not
loaded.

Paper Texture

This menu selection is used to set the paper texture for each of the defined media types. This allows the printer to optimize
the print quality for the media texture.
Menu selection Purpose
Plain Texture Identifies the texture of the paper
loaded in a specific source, and
Transparency Texture
ensures the toner adheres properly to
the printed page.
Glossy Texture
Labels Texture
Vinyl Labels Texture
Bond Texture
Envelope Texture
Letterhead Texture
Preprinted Texture
Colored Texture
Card Stock Texture Identifies the texture of the card stock
loaded in a specific source.
Custom <x> Texture Identifies the texture of the custom
paper loaded in a specific source.
Using printer menus
Values
Off
Statement/A5
Letter/A4
All Listed*
Values
Smooth
Normal*
Rough
Smooth
Normal
Rough*
Smooth
Normal*
Rough
Smooth
Normal*
Rough
Smooth
Normal*
Rough
12
• The Off value indicates no size
substitutions are allowed.
• The All Listed value indicates that
all available substitutions are
allowed.
Shown if Card Stock is supported in
the specified input source.
Shown if the custom type is supported
in the specified input source.