Bin Setup - Lexmark C770 User Manual

Bin Setup

This menu selection is used to specify the output bin where you want your printed material to go to.
Note: Only installed bins that support that media type are displayed.
Menu selection Purpose
Output Bin Specifies the default bin for
printed material.
Configure Bins Determines which output bin(s)
the printer uses for a particular
job.
Overflow Bin
Assign Type/Bin Sends print jobs to a specific
output bin based on the
requested paper type.
Note: If a user-defined name is
available, it is displayed instead
of Custom <x> Bin. The name
is truncated to 24 characters. If
two or more bins share the
same name, the name only
appears once in the Assign
Type/Bin value list.
Using printer menus
Values
Standard Bin*
Bin <x>
Mailbox*
Link
Mail Overflow
Link Optional
Type Assignment
Standard Bin
Bin <x>
Plain Paper Bin
Card Stock Bin
Transparency Bin
Glossy Paper Bin
Labels Bin
Vinyl Labels Bin
Bond Bin
Envelope Bin
Letterhead Bin
Preprinted Bin
Colored Bin
Custom <x> Bin (<x>
represents 1 through 6)
15
• If a user-defined name is available,
it is displayed instead of Bin <x>.
• The name is truncated to 24
characters.
• If two or more bins share the same
name, the name only appears once
in the Output Bin value list.
Sends print jobs to the output bin
designated for that user.
Links two or more bins together as
though they were one large bin. When
one linked bin is full, the printer starts
filling the next linked bin, and
continues with each additional linked
bin.
Only displayed when more than three
optional output bins are installed.
Only displayed when at least two
optional bins are installed.
Sends each job to the output bin
specified for that paper type.
Only installed output bins will be
displayed. If a user-defined name is
available for an output bin, then the
name will be displayed instead.
Disabled*
Standard Bin
Bin 1
Bin 2
Bin 3
Bin 4
Bin 5
Note: Only installed output bins will
be displayed. If Configure Bins is set
to Type Assignment then the default is
the Standard Bin.