Lexmark C770 User Manual page 51

Message
Formatting Flash DO NOT POWER OFF
Fuser Life Warning
Insert Tray <x>
Install bin <x>
Install duplex
Invalid Engine Code
Invalid file format
Invalid Network Code
Invalid PIN
ITU Life Warning
Load manual feeder with
<Custom Type>
Load manual feeder with
<Custom String>
Load manual feeder with <size>
Load manual feeder with
<size> <type>
Load <src> with <Custom Type Name>
Load <src> with <Custom String>
Load <src> <size>
Load <src> <type> <size>
Menus are Disabled
Network
Network <x>
Network <x>, <y>
No held jobs
Understanding printer messages
Action
Warning: Do not turn the printer off while this message is displayed.
Wait for the message to clear.
• Press to clear the message and print without installing a new
fuser.
• Install a new fuser.
Insert the specified tray into the printer.
Bin <x> is no longer present. The Message is cleared when the bin is
installed or the job is cancelled.
Duplex is no longer present. The Message is cleared when the duplex is
installed or the job is cancelled.
Download valid engine code to the printer.
Note: You can download engine code while this message is displayed.
The selected file on the USB device is not valid.
Download valid code to the internal print server.
Note: You can download network code while this message is displayed.
Enter the correct PIN.
• Image transfer unit is near end of life.
• Press to clear the message and print without installing a new
image transfer unit.
• Replace the image transfer unit and, if necessary, reset the printer
internal counter for the image transfer unit.
• Load the specified paper in the manual feed tray or multipurpose
feeder.
• Press to ignore the manual feed request and print on paper
already installed in one of the input sources.
If the printer finds a tray that has paper of the correct type and size, it
feeds paper from that tray. If the printer cannot find a tray with the
correct paper type and size, it prints on whatever paper is installed in
the default input source.
• Cancel the current job.
• Load the input source with the correct type and size media.
• Cancel the current job.
The printer menus are disabled. You cannot change the printer settings
from the operator panel.
Note: You can still cancel a job, print a confidential job, or print a held
job.
Contact your system support person.
A network interface is the active communication link.
A network interface is the active communication link, where <x>
represents the active communication link, and <y> represents the
channel.
Wait for the message to clear.
51