Lexmark C770 User Manual page 21

Menu selection Purpose
Timeouts Specifies the amount of time (in
seconds) the printer waits to
return to the home screen, receive
an end-of-job message, or receive
additional bytes of data from the
computer.
Note: Wait Timeout is only
available when you use PostScript
emulation. This menu value has
no effect on PCL emulation print
jobs.
Note: Print Timeout is only
available when you use PCL
emulations. This menu value has
no effect on PostScript emulation
print jobs.
Using printer menus
Values
Screen Timeout:
15–300
(30*)
Print Timeout
Disabled
1–255
(90*)
Wait Timeout:
Disabled
15–65535 (40*)
Network Job Timeout:
0–255
(90*)
21
Disabled—Disables Screen Timeout.
15–300—Specifies the amount of
time the printer waits before returning
to the home screen.
30* is the default setting.
Disabled—Disables Print Timeout.
1–25—Specifies the amount of time
the printer waits for an end-of-job
message before canceling the
remainder of the print job.
Note: When the timer expires, any
partially formatted page still in the
printer is printed, and other input
ports are examined to see if data
exists.
90* is the default setting.
Disabled—Disables Wait Timeout.
15...65535—Specifies the amount of
time the printer waits for additional
data before it cancels the job.
40* is the default setting.
In 1 second increments
A value of 0 disables the timeout. If a
value between 1–9 is selected, the
setting will be saved at 10.