Yy Scanner Jam; Replace Black Pc Unit; Replace Color Pc Units - Lexmark X940E User Manual

84 Replace black pc unit

The black photoconductor is exhausted. Install a new photoconductor.

84 Replace color pc units

One or more of the color photoconductors are exhausted. Install new cyan, magenta, and yellow photoconductors.
84 Unsupported <color> pc unit
Replace the specified photoconductor(s).
Note: The printer has four photoconductors: cyan, magenta, yellow, and black. The cyan, magenta, and yellow
photoconductors must all be replaced at the same time. The black photoconductor can be replaced separately.
88 <color> toner low
When this message appears, the toner is low.
•
When the print becomes faded, replace the toner cartridge.
•
Touch Continue to clear this message and continue printing.
88 Replace <color> toner
The toner cartridge is exhausted. Replace the specified toner cartridge.
200–289.yy paper jam
1
Clear the paper path.
2
Touch Continue to continue printing.
289 Staple error <x>
1
Clear the jam from the specified stapler area(s).
2
Touch Continue to continue printing.

290-295.yy scanner jam

Clear all original documents from the scanner.
900–999 Service <message>
1
Turn the printer off.
2
Unplug the power cord from the wall outlet.
3
Check all cable connections.
4
Connect the power cord to a properly grounded outlet.
5
Turn the printer back on.
If the service message appears again, contact Customer Support, and report the message.
202