Setup Menu - Lexmark X940E User Manual

Menu item
Job Acct Stat
Print
Clear
Activate Hex Trace
<none>
Coverage Estimator
Off
On

Setup menu

Menu item
Printer Language
PS Emulation
PCL Emulation
Resource Save
Off
On
Description
Prints a list of all stored job statistics or deletes the information from the printer
hard disk
Notes:
•
A printer hard disk must be installed in the printer and operating properly
for this menu item to be available.
•
Selecting Print prints a list of statistics.
•
Clear deletes all job statistics stored on the printer hard disk. Clearing
job account statistics appears on the display.
•
The Clear selection will not appear if Job Accounting is set to
TM
MarkTrack .
Assists in isolating the source of a print job problem
Notes:
•
When Hex Trace is activated, all data sent to the printer is printed in
hexadecimal and character representation and control codes are not
executed.
•
To exit Hex Trace, turn the printer off, or reset the printer.
Provides an estimate of the percentage coverage of cyan, magenta, yellow,
and black on a page. The estimate is printed on a separator page.
Note: Off is the factory default setting.
Description
Specifies the printer language used to communicate data from the computer
to the printer
Notes:
•
PCL emulation uses a PCL interpreter for processing print jobs. PostScript
emulation uses a PS interpreter for processing print jobs. PPDS emulation
uses a PPDS interpreter for processing print jobs.
•
The factory default printer language varies depending on the type of printer
purchased.
•
Setting a printer language as the default does not prevent a program from
sending print jobs that use another printer language.
Specifies how the printer handles temporary downloads, such as fonts and
macros stored in RAM, when the printer receives a job that requires more
memory than is available
Notes:
•
Off is the factory default setting. Off sets the printer to retain the downloads
only until memory is needed. Downloads are deleted in order to process
print jobs.
•
The On setting retains the downloads during language changes and printer
resets. If the printer runs out of memory, 38 Memory Full appears, and
downloads are not deleted.
167