6
Touch
repeatedly until Power Saver appears.
7
Touch
to decrease the time, or touch
The settings available range from 2–240 minutes.
8
Touch Submit.
9
Touch
.
Restoring the factory default settings
1
Make sure the printer is on and Ready appears.
2
On the home screen, touch
3
Touch Settings.
4
Touch General Settings.
5
Touch
repeatedly until Factory Defaults appears.
6
Touch
until Restore Now appears.
7
Touch Submit.
8
Touch
.
Encrypting the printer hard disk
This functionality is available only when a printer hard disk is installed and working properly.
Warning: All files and resources on the printer hard disk will be deleted. Resources residing in the printer flash
memory or RAM will not be affected.
1
Turn the printer off.
2
From the keypad, hold down
3
Release the buttons when the screen with the progress bar appears.
The printer performs a power-on sequence, and then the Configuration menu appears.
4
On the display, touch
5
Touch Disk Encryption.
6
Touch Enable or Disable.
Note: Touch Enable to enable hard disk encryption or Disable to disable hard disk encryption.
Contents will be lost. Continue? appears.
7
Touch Yes.
8
Touch Exit Config Menu.
to increase the time.
.
and
while turning the printer on.
repeatedly until Disk Encryption appears.
226