Submitting Selection; Tray <X> Empty - Lexmark X940E User Manual

System busy, preparing resources for job.
Not all resources needed for the job are available. Wait for the message to clear.
System busy, preparing resources for job. Deleting held job(s).
Not all resources needed for the job are available. Some held jobs are deleted to free system memory. Wait for the
message to clear.

Submitting Selection

Wait for the message to clear.
Tray <x> Empty
Load paper in the tray to clear the message.
Tray <x> Low
Load paper in the specified tray to clear the message.
Tray <x> Missing
Insert the specified tray into the printer.
USB/USB <x>
The printer is using a USB cable connection. The USB port is the active communication link.
Waiting
The printer has received data to print, but is waiting for an End-of-Job command, a Form Feed command, or
additional data.
•
Touch Continue to print the contents of the buffer.
•
Cancel the current print job.
Waiting for redial
The printer is waiting to redial the fax number. Wait for the message to clear.
1565 Emul Error Load Emul Option
The printer automatically clears the message in 30 seconds and then disables the download emulator on the firmware
card.
To fix this, download the correct download emulator version from the Lexmark Web site at www.lexmark.com.
31 Missing or defective <color> cartridge
The specified toner cartridge is either missing or not functioning properly.
•
Remove the specified toner cartridge, and then reinstall it.
•
Remove the specified toner cartridge, and then install a new one.
32 Replace unsupported <color> cartridge
Remove the specified toner cartridge, and then install a supported one.
34 Incorrect paper size, check <src>
•
Load the appropriate paper or other specialty media in the proper tray.
•
Touch Continue to clear the message and print the job using a different paper tray.
197