Lexmark X940E User Manual page 147

Menu item
Scan edge to edge
On
Off
Fax Receive Settings
Menu item
Enable Fax Receive
On
Off
Rings to Answer
1–25
Auto Reduction
On
Off
Paper Source
Auto
Tray <x>
MP Feeder
Output Bin
Standard Bin
Bin 1
Duplex
On
Off
Fax Footer
On
Off
Max Speed
2400
4800
9600
14400
33600
Fax Forwarding
Forward
Print
Print and Forward
Description
Specifies if the original document is scanned edge-to-edge
Note: Off is the factory default setting.
Description
Allows fax jobs to be received by the printer
Note: On is the factory default setting.
Specifies the number of rings before answering an incoming fax job
Note: 1 is the factory default setting.
Scales an incoming fax job so it fits the size of the paper loaded in the
designated fax source
Note: On is the factory default setting.
Specifies the paper source selected to supply paper for the printer to print an
incoming fax
Specifies an output bin for received faxes
Note: Bin 1 is available only when the finisher is installed.
Enables duplex printing (two-sided printing) for incoming fax jobs
Prints the transmission information at the bottom of each page from a received
fax
Note: On is the factory default setting.
Specifies the maximum speed in baud at which faxes are received
Enables forwarding of received faxes to another recipient
147