Reinstalling The System Board - Lexmark X940E User Manual

An internal print server allows connection from the printer to the local area network (LAN). An optional port interface
card expands the ways the printer can connect to a computer or external print server.
1
Access the system board.
2
Unpack the internal print server or port interface card.
3
Remove the metal plate on the system board tray that covers the connector slot, and save the metal plate.
4
Align the connector on the internal print server or port interface card with the connector on the system board.
Note: The cable connectors on the side of the optional card must fit through the opening in the faceplate.
5
Push the internal print server or port interface card firmly into the card connector on the system board.
6
Insert a screw into the hole on the right side of the connector slot. Gently tighten the screw to secure the card
to the system board tray.
7
Reinstall the system board.

Reinstalling the system board

Warning: System board electrical components are easily damaged by static electricity. Touch something metal
on the printer before touching any system board electronic components or connectors.
31