Changing A Custom Type <X> Name; Assigning A Custom Paper Type Name - Lexmark X940E User Manual

Changing a Custom Type <x> name
You can use the Embedded Web Server or MarkVision
of the custom paper types that are loaded. When a Custom Type <x> name is changed, the menus display the new
name instead of Custom Type <x>.
To change a Custom Type <x> name from the Embedded Web Server:
1
Open a Web browser.
Note: The computer must be connected to the same network as the printer.
2
In the address bar, type the IP address of the network printer (for example,192.264.263.17).
3
Press Enter.
4
From the navigation panel of the initial page, click Configuration.
5
Click Paper Menu.
6
Click Custom Name.
7
Type a name for the paper type in a Custom Name <x> box.
Note: This custom name will replace a custom type <x> name under the Custom Types and Paper Size/Type
menus.
8
Click Submit.
Submitting Selection appears.
9
Click Custom Types.
Custom Types appears, followed by your custom name.
10
Select a Paper Type setting from the picklist next to your custom name.
11
Click Submit.
Submitting Selection appears.

Assigning a custom paper type name

Assign a custom paper type name to a tray when linking or unlinking the tray.
1
Make sure the printer is on and Ready appears.
2
From the control panel, touch
3
Touch Paper Menu.
4
Touch Paper Size/Type.
5
Touch the tray number or MP Feeder Type.
6
Touch repeatedly until Custom Type <x> or another custom name appears.
7
Touch Submit.
TM
to define a name other than Custom Type <x> for each
.
42