Nortel Business Communications Manager 450 Installation Manual page 84

84 Capacity expansion card installation
Figure 15 CEC slot
4
5
6
7
8
Copyright © 2006-2009 Nortel Networks
CEC slot
Screw the four metal standoffs (included) into the main board of the base
function tray.
Slide the CEC into position from the back of the base function tray, so that
the CEC protrudes slightly from the front faceplate of the base function tray.
Align the connectors on the card and on the main board of the base function
tray and push down. Ensure that the card is connected securely to the main
board.
Use the four supplied screws to fasten the card to the standoffs.
Reinstall the base function tray and power on the BCM450 system.
Nortel Business Communications Manager 450 1.0
Installation — System
NN40160-301 01.04 Standard
July 2009
--End--