Configuring Mbms For Main Unit Installation - Nortel Business Communications Manager 450 Installation Manual

50 MBM installation
1
Rear of MBM
2

Configuring MBMs for main unit installation

Before installing an MBM in the expansion cabinet, configure it through
Element Manager and set the DIP switches.
Prerequisites
• Before configuring an MBM, install it in the main unit.
Procedure steps
Step
1
Copyright © 2006-2009 Nortel Networks
Locate the DIP switches at the rear or underside of the MBM.
Underside of MBM
654321
DIP switches
Rear view of MBM
Configure all DIP switches to on.
Action
In Element Manager, navigate to Configuration > Resources > Telephony
Resources.
Nortel Business Communications Manager 450 1.0
Installation — System
NN40160-301 01.04 Standard
July 2009
Off
On
On
123456
Off
--End--
Top of MBM