Connecting the ground cables to the rack grounding strip
To connect the chassis ground cables to the rack grounding strip:
1
Locate the shelf grounding point on the rack. This grounding point could be a
grounding strip at the back base, top, or side of the rack.
Note:
grounding strip may look different than the one shown in this example.
2
Attach the lug ends of the chassis ground cables to the rack grounding strip
(Figure
41).
Use a 7/16-inch hex wrench to fasten the hardware in the correct order.
Figure 41 Rack grounding strip example
1
2
3
4
1 = Hex head bolt
2 = Lock washer
Figure 41
shows an example of a rack grounding strip. Your rack
3 = Ground crimp lug
4 = Rack grounding strip
Installing and Maintaining the Passport 8000 Series Chassis
Chapter 3 Installing the 8010co Chassis 73
10433FA