52 MBM installation
Rear of MBM
9
10
Installing an MBM in the main unit or an expansion cabinet
After configuring the DIP switches on an MBM, you can install it in the
BCM450 main unit or expansion cabinet.
Prerequisites
•
Ensure that the DIP switches are configured correctly. For more
information about configuring the DIP switches, see
G4x16 or G8x16 DIP switches (page
switches (page
connect the fiber cables (page
(page
(page
Copyright © 2006-2009 Nortel Networks
Underside of MBM
654321
DIP switches
Rear view of MBM
Set the switches to correspond with the settings shown in the Configure
window.
Repeat for each media bay module you want to install.
46),
Configuring the GATM DIP switches (page
47)or
Configuring MBMs for expansion cabinet installation
51).
Nortel Business Communications Manager 450 1.0
Installation — System
NN40160-301 01.04 Standard
July 2009
Off
On
On
123456
Off
--End--
45),
Configuring the GASM DIP
48),
Fiber expansion module configuration
Top of MBM
Configuring the
46),
To