Siemens LMV5 Quick Start Manual page 59

Parameter Worksheet Legend
The parameters listed in Figure 4-1.1 outline the basic parameters that are necessary for a LMV51
on a simple burner / boiler.
The LMV51 has many more capabilities than what is listed above, and the LMV52 has many more
capabilities than the LMV51.
In order to make its many features user friendly, an LMV5 Parameter worksheet was created.
This worksheet is Section 4-2 and carries all pertinent information concerning the parameters of
the LMV5. A sample of the worksheet is explained below:
Figure 4-1.2 LMV5 Parameter worksheet legend
Menu Path Parameter
States the menu
path necessary
SafteyTme1Gas
to access the
parameter. Bold
SafetyTme1Oil
type indicates
(TSA1)
the higest level
menu.
Interval1Gas
Interval1Oil
Params & Display>
BurnerControl>
Times>
TimesStartup2
SafetyTme2Gas
SafetyTme2Oil
(TSA2)
The parameter worksheet should be used the first few times an engineer / technician sets up a
LMV5 since it provides the necessary information for each parameter in a concise manner.
Note: Not all gas parameters are available to set when the currently selected fuel is oil, and not
all oil parameters are available to set when the currently selected fuel is gas
LMV5 QSG Rev 4
U = User
S = Service
When a fuel train is selected that has a pilot, this setting defines the
overlap of the spark (OUTPUT X4-02.3) and the pilot valve
(OUTPUT X9-01.02). After this....
or
O
When a fuel train is selected that has a pilot, this setting defines the
pilot stabilization period. This time.....
States if the paramter is available on a LMV51 or a
or S
LMV52.
Shaded = Available, Not Shaded = Not Available
When GP2 gas train is selected, this setting defines.....
States what password is necessary
to access the parameter
or
O
U = no password (User)
S = Service, O = OEM
Sec 4
O = OEM
Descriptions / Notes
States which phase the
parameter effects.
Pg 3 www.scccombustion.com
40 -
42
44
50
.