Table of Contents
Advertisement
Do not overheat the clad stainless steel plate by setting the temperature well above recommended
temperatures, or by operating the braising pan without any fluid inside the pan to absorb heat.
Overheating the plate may cause warpage and will carbonize any cooking oil on the plate and cause
sticking.
The lid is counterbalanced and will stay in any position at which it is placed. After some time, the
counterbalancing springs may need to be tightened. Call your local Vulcan-authorized servicer to
make these adjustments.
OPERATION OF LIFTING SYSTEM
Keep the area underneath and around the braising pan clear of your hands or any other objects when
operating the lifting system.
Do not obstruct any of the moving parts of the lift system located underneath the table top on the right
and/or left side of the braising pan. This area must be kept clear of any objects or obstructions at all
times.
Do not operate the lifting system with front doors open (two doors on closed base unit, three doors on
open base unit).
Do not leave the braising pan in the "up" position for extended periods (e.g., overnight or during a
shutdown period between cooking times).
Braising Pans with Manual Lift (Standard)
1. The crank for the manual lift system is located on a hook on the inside of the front door. Open the
door and lift out the crank.
2. Close all front doors.
3. There are two pins on one end of the crank. Insert the crank through the hole on the right door so
that the two pins engage in the slots of the speed reducer coupling located behind the door.
4. Turn the crank handle clockwise to lift the braising pan and counterclockwise to lower the braising
pan.
5. This lift system is not affected by power failure and can be operated during a power failure.
6. Refer to the MAINTENANCE section of this manual for lubrication and maintenance instructions.
Braising Pans with Automatic Power Lift (Optional)
The automatic lift cannot raise the braising pan unless the lid is fully opened.
The pan lift is controlled by the white rocker switch located in the hole on the right door.
— 14 —
Advertisement
Table of Contents
