Light Printout In The Rear Due To Soils On The Pre-Transfer Charging Wire - Canon imageRUNNER ADVANCE 8105 Series Manual

Symptom

Light printout in the rear due to soils on the pre-transfer charging wire

[Inspected by Canon Inc. ]
Description
Light printout in the rear occurred.
Cause
Because toner adhered to the rear side of the pre-transfer charging assembly.
Field Remedy
Clean the pre-transfer charging assembly. If the symptom does not improve after cleaning, replace the
pre-transfer charging wire.
[Reference]
The following parts of the pre-transfer charging assembly are the parts to be periodically replaced in every
500,000 prints. Replace the parts depending on the number of prints.
- Pre-transfer Charging Wire (FB4-3687)
- Pre-transfer Charging Wire Cleaner (FL2-0462)
- Pre-transfer Charging Wire Cleaner Holder (FL2-2720)
[Replaced Parts]
FB4-3687 WIRE, CORONA
pg. 273