Table of Contents
Advertisement
[Caution] When the swing guide upper cover is reassembled, put the arms [1] of swing guide in the link
holder [2].
3) Disconnect the connector [2] of the paper surface sensor cable [1].
[Caution] When disconnecting the connector [2], be sure not to unhook the claw of the photointerrupter.
4) Lift up the swing guide assembly [1], remove the resin stop ring [2] with the needlenose pliers and move
the bushing [3] inward. Do likewise to the opposite side.
pg. 134
Hide quick links:
Advertisement
Table of Contents
