17) Mount the new type static charge eliminator assembly [13](FM1-B151-000) using the new 2 screws
included in the assembly.
18) Assemble the parts in reverse order from step 14).
[Caution] Note the following 2 points when installing the fixing cleaning web.
- Be sure to install the web in the correct direction. [G] shows the web installed in the correct direction,
whereas [H] shows the wrong direction.
- When installing the fixing cleaning web, if the web is brand-new, be sure to tightly wind the web around the
web take-up roller until the green line on the web disappears from view. Even when the web has been used,
make sure to tightly wind the web to install it.
[Replacement Parts]
FM3-7350 CLAW STOPPER UNIT, REAR
FM1-B151 STATIC CHARGE ELIMINATOR ASS'Y
FC9-8847 DUCT, FIXING, LOWER
pg. 244