duplex side registration sensor assembly, the side registration sensor (PS31), the side registration detection
flag, and the side registration slider.
3) Open the front cover, and pull out the fixing/feeding duplex unit.
4) Remove 1 screw for each of the fixing feed right front upper cover [1] and the fixing feed lever [2], and
then detach the covers.
5) Remove 2 screws [1], and detach the fixing feed right front cover [2]. Then remove 3 screws [3] and
detach the fixing feed left cover [4].
6) Remove 1 screw [1], and then remove the handle stopper [2].
pg. 198