Verify Configuration - Emerson Rosemount 2088 Reference Manual

Reference Manual
00809-0100-4108
Table 2-3: LOI Button Operation
Button
Right
2.6.3 Setting the loop to manual
Whenever sending or requesting data that would disrupt the loop or change the output of
the transmitter, set the process application loop to manual control. The Field
Communicator, AMS Device Manager, or the LOI will prompt you to set the loop to manual
when necessary. The prompt is only a reminder; acknowledging this prompt does not set
the loop to manual. It is necessary to set the loop to manual control as a separate
operation.
2.7

Verify configuration

It is recommended that various configuration parameters are verified prior to installation
into the process. The various parameters are detailed out for each configuration tool.
Depending on what configuration tool(s) are available follow the steps listed relevant to
each tool.
2.7.1 Verifying configuration with Field Communicator
Configuration parameters listed in
installation. A Full list of configuration parameters that can be reviewed and configured
using a Field Communicator are located in
Fast key sequences for the latest DD are shown in
legacy DD's contact your local Emerson Representative.
Table 2-4: Device Dashboard Fast Key sequence
From the HOME screen, enter the Fast Key sequences listed
Function
Alarm and Saturation Levels
Damping
Primary Variable
Range Values
Tag
Transfer Function
Units
Reference Manual
(continued)
Yes
Table 2-4
Field Communicator Menu Trees and Fast
ENTER
are to be reviewed prior to transmitter
Table 2-4. For Fast Key sequences for
Fast Key sequence
HART 7 HART 5
2, 2, 2, 5 2, 2, 2, 5
2, 2, 1, 1, 5 2, 2, 1, 1, 5
2, 1, 1, 4, 1 2, 1, 1, 4, 1
2, 1, 1, 4 2, 1, 1, 4
2, 2, 7, 1, 1 2, 2, 7, 1, 1
2, 2, 1, 1, 6 2, 2, 1, 1, 6
2, 2, 1, 1, 4 2, 2, 1, 1, 4
Configuration
April 2021
Keys.
19