Advertisement
This section is comprised of the following two adjustment
items;
. Items required when repairing or replacing a circuit
board. (Described in Sections 4-2 to 4-6.)
. Items required at installation. (Described in Sections 4-7
and 4-8.)
4-1. Preparation
4-1-1. Equipment Required
Measuring Equipment
. Oscilloscope (Band width 300 MHz or more)
Tektronix 2465B or equivalent
. HDTV analog waveform monitor
Tektronix 1735HD/1730HD or equivalent
Peripheral Equipment
. HDVS camera system
HDC-750A
HDCU-700A
MSU-700 (with HKCF-700 installed)
Fixtures
. Extension board EX-512
Sony P/N: A-8273-247-A
. Pattern box PTB-500
Sony P/N: J-6029-140-B
. Grayscale chart (16:9)
Sony P/N: J-6394-080-A
. Camera cable CCZRGB-3
(Used when monitoring video outputs)
*
Please order through the sales channel.
HDC-750A
http://getMANUAL.com
Section 4
Electrical Alignment
*
(3m)
4-1-2. Notes on Adjustment
. All measuring equipment shall be completely calibrated.
. As for initial settings before beginning adjustment, refer
to Section 4-1-4.
. Alignment for HDCA-750A, HDCU-700A and MSU-
700 shall be completed.
4-1 (E)
Advertisement
