Advertisement
3-1. Setup Menu
3-1-4. File Menu
3-1-4. File Menu
The File menu stores and clears the adjustment values or setting values stored in the Reference, OHB,
Operator and Lens files.
To activate the File menu, first display the TOP menu.
Page
Ver.
Item
Reference File
Store File
Clear File
10sec Clear
OHB File
Store File
Operator File
Store Preset File
Clear Preset File
Lens File
File
F Stop
Store File
Clear Current File Press MENU SEL switch
Center H POS
Center V POS
Center POS Store Press MENU SEL switch
3-14 (E)
Settings
Contents
Press MENU SEL switch
Stores the reference values used for automatic setup
to execute
adjustment and the standard settings of the switches as the
reference files
m
. When executing the Store File on the Reference File page,
settings of items which have been set just before the file
store through the Paint, Maintenance and SYS Config
menus are registered as the reference values
. If changed values is to be returned to the reference values
stored in the reference files, recall the standard file using an
MSU/RCP or the setup menu
Press MENU SEL switch
Clears the adjustment values stored as the reference files
to execute
(Temporarily clears the current reference files)
n
If the unit is powered off without execution of the Store File
after clearing the file, the original setting is restored
On, [Off]
Turns on and off the function to clear the reference value by
continuing to push up MENU SELECT switch to ENTER more
than ten seconds
(With 10 sec Clear set at On, move the cursor to a menu item
to be cleared, and press the MENU SEL switch more than ten
seconds while "?" is brinking. The reference item can be
cleared)
n
The setting is returned to Off when the unit is powered off
When the unit is powered off without execution of the Store
File after the file is cleared, the original setting is restored
Press MENU SEL switch
Stores specific data for a CCD unit to be used as the OHB
to execute
files The standard values are stored at the factor (Stores the
white offset value for ND filter, OHB matrix data and so on)
Press MENU SEL switch
Stores the user's preset values of the operator file
to execute
Press MENU SEL switch
Returns the preset values of the operator file to their factory
to execute
settings
1 to [16]
Selects a lens file appropriate for a mounted lens from 16
kinds of the lens files
F1.0 to F3.4 ([F1.5])
Sets a stop number of a lens
Press MENU SEL switch
Stores the adjustment value on each item (except the location
to execute
of the center marker) as the lens file
Returns the selected lens file to the factory setting
to execute
_20 to 20 ([0])
Shifts horizontally the location of the center marker on the
screen
20 (right) ↔ _20 (left)
_20 to 20 ([0])
Shifts vertically the location of the center marker on the screen
20 (down) ↔ _20 (up)
Stores the location of the center marker at present in the
to execute
selected lens file number
HDC-750A
Advertisement
