Advertisement
3-1. Setup Menu
3-1-2. Paint Menu
Page
Ver.
Item
Low-Key SAT
LK CLP LVL
LK Saturation
Clear
Shutter
Shutter/ECS
ECS
S-EVS
Scene File
1
2
3
4
5
File Store
Standard
3-10 (E)
Settings
Contents
_99 to 99 ([0])
Adjusts the chroma level at a point where the luminous intensity of
a object is low
On, [Off]
Turns the above-mentioned LK CLP LVL function on and off
Press MENU SEL switch
Resets numeric settings on the Low-Key SAT page to 0
to execute
(When you press MENU SEL switch, the "Clear" indication flashes.
Press MENU SEL switch again to execute; press CANCEL button
to cancel)
On, [Off]
Turns the shutter/ECS mode on and off
1/100, [1/125], 1/500,
Selects the shutter or ECS mode
1/1000, 1/2000, ECS
(Corresponds to the shutter switch of the unit)
30.0 to 7000 ([30.0]) Hz
Sets the ECS frequency
On, [Off]
Turns the S-EVS mode on and off.
0 to 100 ([0]) %
Sets the desired resolution in %
Storing and recalling a scene file (painting data corresponding to a shot scene)
Storing a scene file
1. Turn MENU SEL switch to move the → cursor to "File Store", then press MENU SEL switch
"File Store" flashes on the viewfinder screen
2. Select the file number (1 to 5)
(If data is already stored at the selected file, the new data replaces the current data)
Recalling a scene file
Turn MENU SEL switch to move the Æ cursor to the desired file number, then press MENU
SEL switch
. Every time MENU SEL switch is pressed, the scene file replaces the current settings
. When the scene file is recalled, an asterisk appears next to the number
Returns the current amount of paint adjustments and switch setting to their reference values
HDC-750A
Advertisement
