Advertisement
3-1. Setup Menu
. . . . . Switches and button
VF DISP switch
ON:
Displays characters and messages indicating the
video camera settings and operation status
OFF:
No character or marker display appears on the
viewfinder screen
MENU: The setup menu appears on the viewfinder screen
MENU SEL switch
Selects the menu item or setting value displayed on the
viewfinder screen.
CANCEL button
Cancels the contents of a menu setting, or returns to the
page select mode or TOP menu.
n
The TOP menu screen indicates the entire configuration of menu items. To display the TOP menu, set the
VF DISP switch to MENU (from OFF) while holding down the MENU SEL switch.
. . . . . Basic operation
1. Displaying the menu
To display the Operation menu, set the VF DISP switch to MENU.
To display the other menus than the Operation menu, first of all, the TOP menu shall be displayed.
To display the TOP menu, set the VF DISP switch to MENU (from OFF) while holding down the
MENU SEL switch. Then turn the MENU SEL switch to move the cursor to a menu item which you
want and then press the MENU SEL switch.
2. To shift the page, turn the MENU SEL switch with a page scroll bar displayed at the top-right of the
screen until the desired page is displayed and press the MENU SEL switch.
The menu enters the item select mode and the page scroll bar disappears.
3. To shift the item, turn the MENU SEL switch until the → cursor points the item to be set and press
the MENU SEL switch.
4. To change the value, turn the MENU SEL switch.
You can change the values quickly by turning the MENU SEL switch fast. You can make very fine
adjustments by turning the switch slowly. By pressing the MENU SEL switch, the setting is entered.
5. The menu is returned to the item select mode or page select mode every time the CANCEL button is
pressed.
6. To exit from the setup menu, set the VF DISP switch to OFF.
. . . . . ROM version
Contents in the menu and factory settings may differ from the descriptions in this manual depending on
the version of ROMs (IC26/IF-569, IC24/SG-226 for camera adaptor).
In this section, an item under "Ver." in the table shows a ROM version. If any version is given, it shows
that the function for the item is added or changed, and the ROM with that version or higher version
supports the function, If no version is given, it shows that every ROM version supports the function.
3-2 (E)
VF DISP switch
DISP
ON
OFF
MENU
MENU SEL switch
MIC
LEVEL
< Front view >
CANCEL botton
CANCEL
HDC-750A
Advertisement
