Advertisement
2-13-3. On the Top Panel
1. Perform the procedures 1 to 3 in Section 2-9 "Replace-
ment of DC/DC Converter Unit" to remove the handle
and handle holder.
2. Remove the two screws securing the switch bracket.
Switch bracket
3. Remove the two screws and remove the SW-806
board.
4. Desolder the switch to be replaced.
Install a new switch in the reverse order of removal.
HDC-750A
B2.6 x 3
SW-806
B2.6 x 4
2-13. Replacement of Function Switches
2-17 (E)
Advertisement
